Premo - Hall Effect Current Transducers
PREMO Group, established more than 45 years ago is an international leading inductive components manufacturer, one of three main Spanish electronic components companies.
The Groups’ broad range of products includes, Current Transducers, Current Sensors, EMC and RFI Power Line Filters. Premo Current Transducers are normally equivalent to LEM Current Transducers.
 |
Manufactured by Premo the HCT-A05 closed loop current transducers are rated at 25 Amps and provide accurate measurements for a variety of signal currents: ( DC, AC, pulsed, mixed.) Careful design ensures low temperature drift a wide frequency bandwidth and very low insertion losses. Download HCT-A05 Current Sensor Data Here
|
|
 |
The HCT-LP series of Current Transducers is offered in two versions rated at either 100 or 200 Amps and provide accurate measurents for a variety of signals. Noteable features include High electrical isolation between primary circuit (high current) and secondary circuit (electronic circuit), Excellent Accuracy and Linearity and a Wide Frequency Bandwidth. The operating temperature is -40 to +850. Suitable applications are AC variable speed drives and servo motor drives, Uninterruptible Power Supplies (UPS), Static converters for DC motor drives and Switched Mode Power Supplies (SMPS). Download HCT-LP 100A Current Sensor Data Here
|
|
 |
Premos’ HCT-300LTP current transducer is rated at 300 Amps but features a peak overload current capability of 900 Amps. |
|
 |
The HCT-PX5 current sensors manufactured by Premo allows accurate measurements of variety of signal currents: DC, AC, pulsed and mixed. Featuring high electrical isolation between the primary and secondary circuits the closed loop construction offers excellent accuracy and linearity and a wide frequency bandwidth. Typical applications include AC variable speed drives and servo motor drives, Uninterruptible Power Supplies (UPS). Static converters for DC motor drives and Switched Mode Power Supplies (SMPS). Download HCT-PX5 10Amp Current Sensor Data here |
|
 |
Manufactured by Premo the HCT-S closed loop current transducer has a nominal current rating off 1000Amps and an overload capability of up to two times hight. These current transducers operates from -40 to +850C. and the closed loop construction allows high accuracy measurements and provides a wide Frequency Bandwidth from DC to 100Hz (-3 dB). |
|
 |
The HCT-BP1 series of Premo Current Transducers are rated at 200 and 600 Amps and are of open loop construction. The overload capacity of each type is up to 3 times the nominal current rating. Applications include AC variable speed drives and servo motor drives, Battery supplied applications, Uninterruptible Power Supplies (UPS). Switched Mode Power Supplies (SMPS) and Static converters for DC motor drives. Download HCT-BP1 200A Current Sensor Data Here |
|
 |
Premo are a leading manufacture of Current Transducers and offer HCT-BP2 in 200 Amp and 600 Amp versions with integral burden resistor. The open loop construction provides good accuracy combined with a wide frequency bandwidth. Download HCT-BP2 200A Current Sensor Data Here |
|
 |
The HCT-F Series of Premo Current Transducers are offered in 500Amp and 800Amp versions. With Isolation upto 5Kv these open loop current transducers with integral burden resistor offer good accuracy and an overload capacity of up to twice the nominal current. Typical applications include AC variable speed drives and servo motor drives, Battery supplied applications, Uninterruptible Power Supplies (UPS) and Static converters for DC motor drives. Download HCT-F 500A Current Sensor Data Here |
|
 |
Rated at 300 Amps the HCT-N current transducers from Premo are of open loop construction and feature high isolation between primary and secondary circuits and an integral burden resistor. Out put is via a Molex connector and mounting is by PCB pins and screws. |